ONE

The ONE post is used as intermediate post for espalier vineyards, also in case of major production, with big loads of grapes, vigorous vegetation and a high degree of mechanization, including mobile handling of containment wires.

ONE

The innovative geometry of the profile, with new reinforced ribs, provides a highly resistant, but flexible and elastic post.

Furthermore, the new geometric shape provides for great resistance, especially on the sides, to ensure the post’s stability in the ground and prevent the rows from tilting.

The post is profiled and molded using structural high yield steel strips, such as those used in the automotive industry, which gives the product great flexibility and elasticity.

The steel is 100% recyclable and thus does not present any disposal issues.

Structural steel surface is coated with a layer of zinc applied through continuous hot-dip galvanization to achieve a uniform layer. Such protection is identified with code Z275, which specifies the amount of zinc used per square meter of coating surface (275 = 275 grams per square meter).

ONE post can be equipped with two different types of hooks: N- and H-shape.

The N-shape hook is recommended for vineyards that are implemented in hilly areas, where the sloped grounds could make the wires come out of their natural seat.

The H-shape hook is recommended for vineyards that are implemented on flat lands and with consistent use of mechanization for containment wires.

It is furthermore available a specific version designed for Free Cordon systems, without side hooks but with just a cut on the top.

Section Length Hook Dimensions
50×40 From 2,50 to 3,00 m H
60X40 From 2,50 to 3,00 m H
50X40 From 2,50 to 3,00 m N
60X40 From 2,50 to 3,00 m N
60X40 2,20 m Free Cordon

Other products in this category

Fill in the following form and you will automatically receive the data sheet at your email address.

Scheda tecnica ENG
Privacy *
Newsletter

Fill in the following form and you will receive an answer from our staff as soon as possible

Contatti ENG
Type of implant *
Privacy *
Newsletter