Plates

They are plastic clips used to fix nets on the structure and joining nets sheets between them, to realize perfectly protecting systems.

Plates

STANDARD NET-STOP PLATE

Thin rectangular plate with ten tips, idea to create an anchoring point on the that allows it tying on the structure.


NET-STOP PLATE WITH HOOK

Rectangular plate with two outer hooks to attach it to wires and cables.


NET-STOP PLATE WITH ANCORPLACK HOOK

Rectangular plate with one outer hook to attach it to wires and cables.


TEKNICA PLATE

The TEKNICA plate is used to secure the anti-rain film to the structure in order to guarantee an excellent protection against adverse weather.

The plates are made of a high-quality plastic material guaranteed to withstand temperatures ranging between +50 and -30 degrees Celsius and to counteract the stresses the system is subjected to. The material used is a black polypropylene with high impact resistance even at low temperatures and remarkable mechanical characteristics.

USED MATERIAL
The TEKNICA plate has been designed to guarantee:

  • Easy and quick installation;
  • No sharp edge that may harm the film;
  • wide surface attached to the film and high resistance to breakage;
  • easy and quick unhook during film closure operation.

Thanks to steel screw that blocks it, TECNIKA plate perfect adhere to the film, joining them perfectly.

Due to its particular shape, it can be connected to the system in two ways:

  1. Through elastic rope
  2. Through carabiner.

PLASTIC RING FOR ANTI-RAIN FILM Ø 40 MM

Fast-locking ring, used to connect eyeleted anti-rain films on top cable or on longitudinal wires of anti-rain structures.


COLMIX-FIX PLATE

COLMIX-FIX plate is used to fix anti-hail net to installation top wire to avoid net sliding sideways under weight of hail stones that might gather during a storm, a sliding that might ease hail stone entrance inside the orchard with consequent damage to crops.

USED MATERIAL
COLMIX-FIX plate can be equipped with an accessory, a plastic strip, to close anti-hail net during wintertime.

Plates are made of high-quality plastic material, tested to resist temperatures from +50 to -30 Celsius degrees and to contrast stresses the system is subjected to. Particularly, used material is a black polypropylene with high impact-resistance, even at low temperatures, and remarkable mechanical characteristics.

Plates are designed to ensure quick and easy installation. Plates edges are completely rounded not to damage the net.

The plastic strip is designed to fix anti-hail net to top wire, with several loops to set them up, containing at best gathered net without ruining it.

COLMIX-FIX plate has been designed to guarantee:

  • easy and fast installation;
  • no sharp surface that might brush against net;
  • wide fixing surface to the net and very high breaking strength;
  • easy unfastening in case of system maintenance.

Other products in this category

Fill in the following form and you will automatically receive the data sheet at your email address.

Scheda tecnica ENG
Privacy *
Newsletter

Fill in the following form and you will receive an answer from our staff as soon as possible

Contatti ENG
Type of implant *
Privacy *
Newsletter
Cliente